1
Sell and Swap / Re: BMX Sale ---Cult,Stranger,BSD,Animal,Fit
« on: October 02, 2017, 07:51:07 PM »
Still have the stranger frame?
Also: does it have brake mounts?
Also: does it have brake mounts?
Welcome, Guest. Please login or register.
Did you miss your activation email? November 04, 2025, 08:17:21 AM
Did you miss your activation email? November 04, 2025, 08:17:21 AM
| Multimedia |
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
The Bike Shop / Re: Mtb crank question for you tech savvy folks
« on: April 20, 2017, 04:25:30 PM »
Same spacers.
When I measure the spindle, the one is longer than the other.
Which explains it. But they are BOTH 113mm spindle.
I wish there was a way I could tighten the arms from both sides.
When I measure the spindle, the one is longer than the other.
Which explains it. But they are BOTH 113mm spindle.
I wish there was a way I could tighten the arms from both sides.
3
The Bike Shop / Mtb crank question for you tech savvy folks
« on: April 19, 2017, 06:17:40 PM »
Pedal snapped off my cranks on Sunday, so I bought new ones. Didn't feel like putting too much effort into the whole thing, so I bought the same cranks (updated ones).
The spindle reads 113mm so I bought the new ones in the same exact 113mm size but they don't fit the same as the last pair.
There is 2mm of slack in spindle when I slide them on.
How could this be? They are the EXACT SAME cranks?
The cranks are e*thirteen "the hive" xcx.
I will post pics if my discription doesn't make sense.
Thanks in advance!
The spindle reads 113mm so I bought the new ones in the same exact 113mm size but they don't fit the same as the last pair.
There is 2mm of slack in spindle when I slide them on.
How could this be? They are the EXACT SAME cranks?
The cranks are e*thirteen "the hive" xcx.
I will post pics if my discription doesn't make sense.
Thanks in advance!
4
Sell and Swap / Re: Odyssey Key Chain for 28-9w Halflink
« on: August 30, 2016, 09:11:05 PM »
I'll buy this
5
Sell and Swap / Odyssey clutch wheel
« on: July 31, 2016, 10:12:23 AM »
Look at this on eBay:
https://www.ebay.com/itm/262541414299
Half the cost of what it would run you to build one up.
https://www.ebay.com/itm/262541414299
Half the cost of what it would run you to build one up.
6
Sell and Swap / FS: Flybikes Geo frame 21.3 top tube
« on: July 20, 2016, 05:51:32 PM »
On eBay right now cheap.
Get up on it son!
Get up on it son!
7
The Bike Shop / Re: odyssey clutch: clicking noise when I stop pedaling
« on: June 06, 2016, 03:05:29 PM »
Update
I greased the wheel and the noise is gone. Butter.
But!
I still can't tighten up the slack. It's a full quarter pedal which is a bit much.
I use a 2.5 mil Allen key and the adjustable nut won't tighten.
Frustrating.
I may have to take it apart to investigate.
I greased the wheel and the noise is gone. Butter.
But!
I still can't tighten up the slack. It's a full quarter pedal which is a bit much.
I use a 2.5 mil Allen key and the adjustable nut won't tighten.
Frustrating.
I may have to take it apart to investigate.
8
The Bike Shop / Re: odyssey clutch: clicking noise when I stop pedaling
« on: May 30, 2016, 08:08:31 AM »
Greased it up and so far it sounds like the harsh clicking noise has stopped.
Thank you.
However, when I greased it, the slack moved all the way back to its original position. I had it tightened up to feel more like a cassette.
Why did it move without loosening it?
Thank you.
However, when I greased it, the slack moved all the way back to its original position. I had it tightened up to feel more like a cassette.
Why did it move without loosening it?
9
The Bike Shop / Re: odyssey clutch: clicking noise when I stop pedaling
« on: May 26, 2016, 03:52:56 PM »
What kind of grease should I use? WD 40 ruins sealed bearings, and regular grease is as think as marshmallow. Any recommendations?
Thanks for your help everyone.
Thanks for your help everyone.
10
The Bike Shop / Re: odyssey clutch: clicking noise when I stop pedaling
« on: May 22, 2016, 06:46:18 PM »
Freecoaster is new
Chain is new
Sprocket is brand new
The sound is coming from inside he hub.
I know spraying WD-40 inside the hub will destroy it. But is there an actual lubricant I can spray into the slack adjusting hole to grease the hell out of the hub to get the clutch to stop sticking?
Chain is new
Sprocket is brand new
The sound is coming from inside he hub.
I know spraying WD-40 inside the hub will destroy it. But is there an actual lubricant I can spray into the slack adjusting hole to grease the hell out of the hub to get the clutch to stop sticking?
11
The Bike Shop / Re: odyssey clutch: clicking noise when I stop pedaling
« on: May 22, 2016, 06:31:03 PM »
Single click every time I stop pedaling but the wheel is still rolling.
Sounds awful.
Sounds awful.
12
The Bike Shop / odyssey clutch: clicking noise when I stop pedaling
« on: May 22, 2016, 03:24:17 PM »
Anyone know how to make this stop?
13
Sell and Swap / Re: Need an internal BB spacer (19mm)
« on: May 20, 2016, 09:25:07 AM »
Do you have paypal?
14
Sell and Swap / Re: Need an internal BB spacer (19mm)
« on: May 17, 2016, 05:09:50 PM »
Nice! How much for one?
15
Sell and Swap / Re: Need an internal BB spacer (19mm)
« on: May 12, 2016, 07:02:19 PM »
19mm
51mm long
51mm long
 Tell them " Sheepdog sent you", for a little something special |
 Click this image for a little something special |
