Author Topic: Post Your Guns (Read 2796634 times)

master · « **Reply #2760 on:** October 21, 2011, 04:59:20 PM »

Quote from: couch;3487567

Lower is almost finished. I picked up the KNS trigger pins, Radlock, Magpul BAD, JD Enterprise LPK (without the trigger but they threw it in anyways), carbine buffer and carbine action spring. Still waiting on the Magpul UBR I bought on CG, Geissele SSA trigger and Battle Arms Development Ambi Safety Selecter (BAD-ASS). All that should arrive anyday now.

You'll have to tell us what you think of that bolt release... I have the reload sequence so drilled into me with a standard bolt release that the extended one seems like it would be so awkward.

couch · « **Reply #2761 on:** October 21, 2011, 05:43:23 PM »

Barrels mist have a permanently attached muzzle device. Basically a blind hole thru the device and into the barrel, a pin pressed in then filled with weld. Must be a minimum of 16" including the device.

The bolt catch can be used exactly the same as without the BAD lever. It allows you to release the bolt and lock it back with your trigger finger as well as retain all standard function. It simply clamps onto the stock catch.

This bullet button shit sucks though.

master · « **Reply #2762 on:** October 21, 2011, 06:18:22 PM »

Quote from: couch;3487679

Barrels mist have a permanently attached muzzle device. Basically a blind hole thru the device and into the barrel, a pin pressed in then filled with weld. Must be a minimum of 16" including the device.

The bolt catch can be used exactly the same as without the BAD lever. It allows you to release the bolt and lock it back with your trigger finger as well as retain all standard function. It simply clamps onto the stock catch.

This bullet button shit sucks though.

FYI the muzzle device can be Silver Soldered too... blind pins are a PITA. Only matters if you're building it yourself though.

BOUNCEHOUSE420 · « **Reply #2763 on:** October 21, 2011, 08:20:13 PM »

Quote from: couch;3487679

This bullet button shit sucks though.

honestly i feel like im faster with the bullet button and the Ultimate Bullet Button Tool installed on my mag than with regular mag release....

i also wasnt that stoked on standard cap mags too long to load and empty too fast:D

master · « **Reply #2764 on:** October 21, 2011, 09:21:00 PM »

Quote from: couch;3487679

This bullet button shit sucks though.

Quote from: BOUNCEHOUSE420;3487731

honestly i feel like im faster with the bullet button and the Ultimate Bullet Button Tool installed on my mag than with regular mag release....

i also wasnt that stoked on standard cap mags too long to load and empty too fast:D

I was so confused for a minute until I realized you guys have to deal with all the CA bullshit.........

Fuck that. Detachable mags FTW.

yacqueli · « **Reply #2765 on:** October 21, 2011, 10:19:32 PM »

Quote from: couch;3487601

I'd like to keep the entire upper under $800

I'm currently looking at this Rifle Gear Upper and swapping out to a quad rail.

Hmmmm I have this upper with a bcm fa bcg

deathrow · « **Reply #2766 on:** October 23, 2011, 09:50:18 PM »

went to a show today. highly stoked on a ruger 44 mag carbine i saw.

Birdmane · « **Reply #2767 on:** October 24, 2011, 12:07:56 AM »

camp carbine in .44?

swoop it up

Taylor Mefford · « **Reply #2768 on:** October 24, 2011, 08:41:21 PM »

So i inherited an old Smith and Wesson .22 revolver, but i know NOTHING about it. It looks super old and idk if i should even shoot it.

any ideas?

deathrow · « **Reply #2769 on:** October 24, 2011, 08:46:56 PM »

Quote from: Birdmane;3488416

camp carbine in .44?

swoop it up

yeah it was. i wanted it very badly. i will have one eventually.

deathrow · « **Reply #2770 on:** October 24, 2011, 08:48:44 PM »

its not that old probably 60's or 70's. inspect the frame and barrel for cracks and such and shoot the shit out of it. if you don't feel confident enough to do it yourself take it to a gunsmith and have them do it.

Taylor Mefford · « **Reply #2771 on:** October 24, 2011, 09:29:37 PM »

Yep, did some research and in fact its from 1956. Still pretty old.

Birdmane · « **Reply #2772 on:** October 24, 2011, 10:20:18 PM »

It should be a 3 screw frame with a pinned barrel

Open the cylinder and it should say the model number on the frame under the barrel.

Looks like a K-22 Masterpiece to me.

Taylor Mefford · « **Reply #2773 on:** October 24, 2011, 10:52:32 PM »

Yep thats what it is. Thanks man

Birdmane · « **Reply #2774 on:** October 25, 2011, 01:01:19 AM »

In 90 days I get 10% below wholesale on Rock River, LMT, Noveske, LWRC, Smith and Wesson, Ruger.

22% under wholesale on Springfield Armory.

I will not make any moneys.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #2774 on:** October 25, 2011, 01:01:19 AM »

Author Topic: Post Your Guns (Read 2796634 times)

BOUNCEHOUSE420

Bikeguide.org - Bike maintenance for BMX'ers