Multimedia

« previous next »
Pages: [1]

Author Topic: Odyssey Monolever/M2 question..  (Read 5109 times)

0 Members and 1 Guest are viewing this topic.

Offline RevShawn

  • Member
  • ***
  • Posts: 153
    • View Profile
Odyssey Monolever/M2 question..
« on: August 15, 2016, 01:41:43 PM »
Does anyone know if you can swap levers between the M2 and the Monolever? I want a Trigger M2, but they no longer exist.... I was gonna buy a Trigger Monolever and put the lever in the M2...
Logged

Offline MSBNL

  • Sr. Member
  • ****
  • Posts: 610
    • View Profile
Re: Odyssey Monolever/M2 question..
« Reply #1 on: August 15, 2016, 07:57:17 PM »
From what I remember the bolt holding the lever is a bit longer , the lever itsself should be interchangeable.
Logged

Offline RevShawn

  • Member
  • ***
  • Posts: 153
    • View Profile
Re: Odyssey Monolever/M2 question..
« Reply #2 on: August 18, 2016, 09:09:09 AM »

Thanks!
Logged

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Re: Odyssey Monolever/M2 question..
« Reply #3 on: September 16, 2016, 07:50:43 PM »
The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake
Logged

Offline RevShawn

  • Member
  • ***
  • Posts: 153
    • View Profile
Re: Odyssey Monolever/M2 question..
« Reply #4 on: September 23, 2016, 10:56:52 AM »
Quote from: Professor Horatio Hufnagel on September 16, 2016, 07:50:43 PM
The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake

Thanks Prof!!!
Logged

Bikeguide.org - Bike maintenance for BMX'ers

Re: Odyssey Monolever/M2 question..
« Reply #4 on: September 23, 2016, 10:56:52 AM »
Pages: [1]
« previous next »
 

-->

Tell them " Sheepdog sent you", for a little something special
Click this image for a little something special