Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - meathead

Pages: [1]
The Bike Shop / bending hub flanges back?
« on: December 12, 2016, 11:54:14 AM »
Right i have a slight problem!
I've kinda bent the flange on my Profile SS shell and was wondering is there a "safe" way to bend the flange back? also is there any gaurds that fully cover the flange on the ss? my BSD dont seem to be big enough

now to wait 30 years for a reply! cheers

The Bike Shop / dk ironcross pedal axle?
« on: January 26, 2016, 08:50:22 AM »
in need for some dier help right now, after purchasing the pedals last week off ebay for  only 12 the axle and maybe bearings have gone poop, and locked up, what can i do to fix this? and what axles from other pedals will work?


The Lounge / KytleVoth biggest CLINT on bikeguide
« on: January 23, 2016, 05:38:41 PM »

The Bike Shop / demoliton vulcan v2 on the front?
« on: January 07, 2016, 03:46:53 AM »
hello lads need a bit of help, has anyone used Demolition Vulcan V2 on the front? will it work with out spending ages modifying/bodging it?
cheers mike

The Bike Shop / converting F25 forks to 14mm?
« on: October 10, 2015, 02:43:35 PM »
would this void the warranty? sorry if this has been asked befor but cant seem to find a definitive answer

The Bike Shop / araya 7x rims
« on: September 15, 2015, 08:38:09 AM »
i need of a bit of help,does anyone know anything about them cant seem to find out anything online.


The Bike Shop / marmoset wobble
« on: August 26, 2015, 03:13:04 PM »
has anyone else experienced this? its had a slight wobble for a few months but lately its got bigger , about 1.5mm?

isit normal?

Riding Videos / CREAM PIE BOY!
« on: August 18, 2015, 01:17:02 PM »
a few clips that me and a few mates have filmed over the last couple months.

havent really been riding lately so rather happy to get a couple clips at least .

« on: July 24, 2015, 03:37:28 PM »
Frame: FBM Angel of death 20.75 welded lugs
Bars: animal bob bars , cut to 23"
Grips: some old uniteds , soon odi long necks
Stem: FBM PMA topload (free with frame)
Headset: seal?
Forks: odyssey f25 welded lugs
Seat: Bone Deth vibrator
Seat post: Eclat layback
Cranks: Primo powerbites mark1
Sprocket: DK ironcross 28t
Pedals: wellgo sealed metal
Chain: kmc
front: eclat leaver, odyssey cable , salt caliper, exposure clear pads
rear, eclat leaver, animal cable , eclat caliper , exposure clear pads
Tires: Animal mtt 2.1 front animal tww 2.0 folding rear
Front wheel: gsport marmoset (with wobble :( ),odyssey midway , 2 snafu hex pegs ,2 gland mk3
Rear wheel: currently .... eclat pulse , eclat trippin ,eclat bell guard , 2 snafu hex pegs

waited around 10 months for the frame to arrive! now just need the new back wheel and tires and she's done!

The Bike Shop / Ideal BL hubs?
« on: June 13, 2015, 08:26:01 AM »
anyone  know anything about them? lookin at getting an axle for my SS hub soon and these look pretty rad
just want to be sure that it wont snap in an hour

Bike Gallery / almost done!
« on: May 17, 2015, 03:30:03 AM »
ALMOST finished the bike , just waiting for my bloody fbm frame and need a new back wheel.

heres a run down on parts
odi grips
bob bars
eclat leaver
animal stem
seal headset
sunday forecoaster
odyessy f25 forks
animal mtt 2.1
2 snafu hex pegs (the old ones not this new shit!)
2 gland mk3
bonedeth seat
eclat post
powerbites 180mm
dk ironcross 28t  8)
savage/wellgo "grind plate" pedals with out the bastard grind plate!
kmc 410 chain
animal tww 2.0
eclat pulse lhd 9t
eclat trippin 
eclat bell
2 snafu pegs

 I'll get a picture up when i manage to work out how ?

U.K. / wanted! BROKEN! profile mini hub!
« on: February 01, 2015, 12:36:45 PM »
working or broken shell, just need the internals idealy cheap with a 10 or 12 driver and being lhd


The Bike Shop / mini and ss hubs?
« on: January 23, 2015, 04:17:21 PM »
can anyone tell me if im correct in thinking the rear mini internals will fit in a ss hubshell? cheers

U.K. / for sale and wanted
« on: January 15, 2015, 04:55:23 PM »

gsport marmoset mk2 to hazard lite , badly sprayed needs new spokes

shadow vutlus bars 8x26 dent in cross bar shit paint

primo mix lhd HUBSHELL including the axle and bearings  axle is pretty fucked 8t driver is fucked , laced to odyessy midway rim

animal sprocky balboha 23t used for a week

shadow crank n bones sprocket used for a couple weeks to get to and from work


dk ironcross sprocket + pedals , FBM bottle neck stem , profile ss hubs 48spoke  lhd both have to be 14mm

pictures and maybe some more tomorrow

Riding Videos / newest little edit
« on: December 27, 2014, 04:36:24 PM »
filmed this a couple months back before the weather turned to utter crap.Thoughts? What could i improve on filming wise and editing wise? filmed with a nikon d3100 with the 18-55mm kit lenses

Pages: [1]

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special