The Street > The Bike Shop
odyssey quik slic cable
G:
Do you have cable sticking out of the back hole? You should aim to have the cable flush with the outer face of the clamp on the otherside.
The distance from the edge of the cable hole to the closed end of the clamp body should be a touch under 3mm and this should be compatible with all levers (especially our own obviously).
:)
G.
blueee:
i used a knarp one time and when the cable finally snapped at the lever end, the knarp fell out. probably shoulda gone n looked for it wherever the cable snapped
montymitch:
Tried one today after my Animal cable shit the bed but I really don't like e knarp idea. Went with a reg cable instead.
G:
--- Quote from: montymitch;3579370 ---Tried one today after my Animal cable shit the bed but I really don't like e knarp idea. Went with a reg cable instead.
--- End quote ---
The clamp is only there for frames with weird stop positions, for 95% of bikes you just need to buy the right length and stick it on, it takes 5 seconds..
Length calculator here:-
http://www.odysseybmx.com/dailyword/2012/02/available-now-quik-slic-linear-kables/
:)
G.
KillSeth:
Truth, this cable is awesome. Once the Springfield brakes are released I hope to be able to install and dial my brakes in in less than a minute.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version