The Street > The Bike Shop
Quick Questions
Prodigal Son:
My axle isn't broached and the non drive side bent and that's why I figured it stripped. Since it's stripped I can't do the suggested. I would've already done that anyways if I could've.
hugh.:
What were the seatposts that had 'SEATPOST' written on them?
hugh.:
or then had something odd written on them. I cant remember.
dude...:
--- Quote from: Prodigal Son on February 07, 2015, 06:47:28 PM ---My axle isn't broached and the non drive side bent and that's why I figured it stripped. Since it's stripped I can't do the suggested. I would've already done that anyways if I could've.
--- End quote ---
thread 2 nuts onto your axle, and then using 2 spanners (put the vice grips away) tighten them together really tightly. then you should be able to put a spanner on one of them (theyve got to be on real tight so they dont budge-the outer one should work best), and it should keep the axle tight so that you can crank the locknut loose.
also grease the threads on the axle just next to the locknut so that once it moves, its going to unscrew a bit smoother
Prodigal Son:
Oh I put the lock nut in a vice and got a pipe wrench. I got it all with damaging the parts I needed. Just need a new cow washer as mine looks shitty from having a hub guard on it.
The cult axle for their mix version hub is the same as the remix female apparently.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version