The Street > Common Questions and former stickies.
common bearing and bolt/nut sizes
big_papa_nuts:
this will be a compiled list of common bearing and bolt/nut thread sizes.
Bearings
6000
-Odyssey Vandero hub
-Primo N4 hub
6202
-Geisha/Federal/Reverse non drive side hub bearing
6303
-Reloader non drive side hub bearing
6802
-Profile cassette driver bearing (9t^)
-Geisha/Federal/Reverse driver bearings
-Primo Mix driver bearings (& needle/bushing)
-Proper driver bearings
-Madera driver bearings
6804
-Gsport Marmoset bearing
6902
-Odyssey cassette body bearing
-Odyssey driver bearing (10t^)
-Primo Pro driver bearing
-Demolition Anorexia hub bearing
-Proper Magnalite 2
6903
-Madera hub bearing
-Primo Mix cassette hub bearing
-Odyssey Vandero2 hub bearing
-Profile Mini hub bearing
6904
-Gsport Homer hub bearings
-Gsport Monkey hub bearings
7905
-Geshia/Reloader/Federal/Reverse the drive side hub bearinga
R12
-MID 19mm bb bearing
hk1210
-Fly Ruben pedals (roller bearing)
697zz (697 2rs)
-Fly Ruben pedals (sealed bearing)
Profile Hub bearing set.
Nice site for sealed bearing dimensions, etc.
http://www.endurobearings.com/products/enduro_bearings.html
thanks for contributing; alittlekidsbike, Ride2Live2Ride, super.chief, marsh, BurlyAsFack, theboredbmxer
couch:
Threaded bits
1/4 - .875
-Profile Slim Jim clamp bolt
5/16-18
-most american made stem bolts
-RNC spindle thread
5/16-24
-Unsealed Jim C locknut
3/8-24
-Profile cranks
-The House/Premium female axles
-Gsport Marmoset/Monkey hub (1.5" length)
-Odyssey Vandero2
-Stolen Team crank spindle
-Colony Clone hub
-Demolition Mary Kate hub
-Shadow Raptor hub
-Superstar Overdrive hub
3/8-26
-KHE Gaysha hub
-most thru axle front hubs
-Primo Jewels/Andys nuts
3/8-16
-Profile mini female axles (1.5" length)
-Madera female axle
M4x0.70
- S&M / Fit Gyro tab
M5x0.80
- Odyssey Evo Knarp bolts (5mm length)
M6x1.0
-standard brake mounts (20mm length)
-removable brake mounts (15mm length)
-brake pads
-Odyssey brake lever bolts (15 & 20mm length)
M8x1.25
-most overseas stem bolts
-Primo pinchbolts
-Stolen Team cranks sprocket bolt (small)
-Fit cranks sprocket bolt (small)
M10x1.0
-Twombolt sprocket bolt
-Wombolt spindle bolt (solid)
-Wombolt sprocket bolt
-Wethepeople Supreme front hub bolts
-Flybikes hub bolt
-Eclat hub bolts
M10x1.25
-Oversize Star Nut
-S&M/Fit Compression Cap
-Tree H10 Compression Cap
M10x1.5
-Pivotal seat bolt (50mm length)
-Stolen Team cranks sprocket bolt (large)
-Fit cranks sprocket bolt (large)
M11x1.0
-Primo spindle
9/16-18
-Gsport Homer bolts/helicoil
9/16-20
-right pedal/crank
9/16-20 (left hand)
-left pedal/crank
M12x1.25
-Twombolt spindle bolt (hollow)
-Profile GDH (extra hollow) crank bolts
M14x1.0
-14mm axles
M14 x 1.25
-Gsport Ratchet bolts
M15 x 1
-Flybikes cranks.
M20x1.5
-Tree bar ends
M24x1.5
-Odyssey Compression Cap
-Standard Byke Compression Cap
-ZodiacEng. Compression Cap
M25x1.5
-Stln Compression Cap
1.37x24
-euro bottom brackets
-freewheel thread
Excellent source for custom bolts and conversion kits; Blue Six Bikes
thanks for contributing; pegs, Leon_Sumbitches, don-231, big_papa_nuts, JeffersonC, jonathan, super.chief, Ride2Live2Ride, Pedrofsky, atxboy, Andras, Ainsworth112294
RideFour15:
--- Quote from: couch;1598686 ---M8x1.25
-most overseas stems
-primo pinchbolts
--- End quote ---
Any metric stem I've used was size 6, not 8.
RideFour15:
--- Quote from: TheHouseProduct;1599094 ---
Nope, you have always used a 6mm wrench. That has nothing to do with the threads. A G-Sport uses a 9/16" wrench, but has 3/8" threads.
--- End quote ---
I didn't realize M8 was the thread, I thought it was the size of the bolt like the imperial ones listed before it. So is the 1.25 the length of the bolt then?
greenreese:
--- Quote from: RideFour15;1599129 ---I didn't realize M8 was the thread, I thought it was the size of the bolt like the imperial ones listed before it. So is the 1.25 the length of the bolt then?
--- End quote ---
Picture book.
Navigation
[0] Message Index
[#] Next page
Go to full version