Multimedia

Author Topic: Could something about the hub shell repeatedly damage drivers  (Read 1772 times)

0 Members and 1 Guest are viewing this topic.

Offline Davet

  • Member
  • ***
  • Posts: 180
    • View Profile
Could something about the hub shell repeatedly damage drivers
« on: February 28, 2021, 05:39:27 PM »
I got an Antigram wheel a while back it started slipping and stopped working when I took it apart, the c-clip and spiral retaining ring was chewed up and the pawls would not stay in, Odyssey sent me a new driver, now the same thing has happened after just a month, could something about the hub shell like a defect or damage be causing the damage to the new driver? Thanks! 
« Last Edit: February 28, 2021, 05:41:06 PM by Davet »

Offline smsabb

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Could something about the hub shell repeatedly damage drivers
« Reply #1 on: April 30, 2021, 02:15:57 PM »
I would reach out to Chris C at odyssey he will be able to help you figure it out .You may need to send the hub in possibly .Could your axle be bent?Was it really dirty inside where the pawls are in the hub when you took it apart?

Bikeguide.org - Bike maintenance for BMX'ers

Re: Could something about the hub shell repeatedly damage drivers
« Reply #1 on: April 30, 2021, 02:15:57 PM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special
Hello