The Street > The Bike Shop

Odyssey clutch v2 opinions

<< < (4/5) > >>

smsabb:
So I have a v2 Clutch and I have ridden it maybe 10 times and mostly just tooling around when I ride .After maybe a quarter mile of total distance it developed side to side play in the hub .They sent out a replacement driver but still have the same issue .Its an awesome hub but I wish it had some adjustment possibilities .

JohnW:

--- Quote from: smsabb on April 30, 2021, 01:48:43 PM ---So I have a v2 Clutch and I have ridden it maybe 10 times and mostly just tooling around when I ride .After maybe a quarter mile of total distance it developed side to side play in the hub .They sent out a replacement driver but still have the same issue .Its an awesome hub but I wish it had some adjustment possibilities .

--- End quote ---
Weird, it took well over a year of hard riding for the v1 to develop that and I still don't have any in the V2 after close to 2 years. If you have a spare wheel to ride you may wanna send that in to them, or hit up a local bike shop that carries Odyssey stuff for warranty. Maybe there was a machining mistake made at the factory? Mine's holding up great and I've had to rebuild freecoasters like 50 times before getting one, and I'm very rough on my bike. And also go on road bike rides with it...

smsabb:
Odyssey replaced the whole wheel .I ran a shop for years and worked in others .Have had a freecoaster for a real long time (First one was a graveyard freecoaster (nankai ) That I got in 96 . Im wondering how the profile hub is and the new bsd hub .

smsabb:
So if anyone cares for an update ,My first clutch hub the problems I had were because they didnt put the c clip in the hub from the factory and there was something wonky happening because of that .I got both the Madera and the bsd and didnt like either one .So back on my clutch v2 and have 2 wheels I spent wayyyyy too much money on that I need to get rid of .

JohnW:

--- Quote from: smsabb on December 13, 2022, 12:00:20 PM ---So if anyone cares for an update ,My first clutch hub the problems I had were because they didnt put the c clip in the hub from the factory and there was something wonky happening because of that .I got both the Madera and the bsd and didnt like either one .So back on my clutch v2 and have 2 wheels I spent wayyyyy too much money on that I need to get rid of .

--- End quote ---
That C-clip was an important part to keep the hub together without putting side load on the driver bearing, which wouldn't work now that it's a needle bearing - and was the main cause of old style coasters blowing up.

According to FB memories I laced my Clutch v2 up 4 years ago last week. Got a very tiny bit of side to side play, and that's it. Still working perfectly, all I've done was open it up to regrease it over 2 years ago cause it started sticking a tiny bit when I would stop pedaling.  Absolutely insane that I've had the same coaster hold up for a single year, let alone 4. I used to break the old ones at least once every couple months if I didn't periodically rebuild them...

Navigation

[0] Message Index

[#] Next page

[*] Previous page