Multimedia

Author Topic: Gsport uniguard  (Read 6441 times)

0 Members and 1 Guest are viewing this topic.

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Gsport uniguard
« on: February 27, 2018, 08:31:20 PM »
Anyone got any negative feedback on these or do they live up to the hype?

Offline WoBBLE

  • Member
  • ***
  • Posts: 155
    • View Profile
Re: Gsport uniguard
« Reply #1 on: February 28, 2018, 02:13:02 PM »
I'm really impressed with mine, no negatives at all. Decent price point, strong and fully reliable.
Taking the children was a bad move...

Offline montymitch

  • Sr. Member
  • ****
  • Posts: 1029
    • View Profile
Re: Gsport uniguard
« Reply #2 on: March 05, 2018, 09:27:54 PM »
I had to do some substantial Dremeling on mine to keep the chain from hitting it, but I love the dumb little thing.

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Re: Gsport uniguard
« Reply #3 on: March 08, 2018, 04:47:39 PM »
Are you running some kinda of atypical setup mitch? Like 10t, loose chain or bulky chain?

Offline Bunky

  • Badges? We don't need no stinkin' badges!
  • Global Moderator
  • Veteran
  • *****
  • Posts: 5743
    • View Profile
Re: Gsport uniguard
« Reply #4 on: March 08, 2018, 05:10:42 PM »
Or are you running it on the inside of the dropout instead of the outside as it's intended?
Quote from: G
this website is essentially an irrelevant back-water of the internet

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Re: Gsport uniguard
« Reply #5 on: March 08, 2018, 06:42:45 PM »
Fess up now before Bunky comes back

Offline montymitch

  • Sr. Member
  • ****
  • Posts: 1029
    • View Profile
Re: Gsport uniguard
« Reply #6 on: March 15, 2018, 08:26:14 PM »
Sorry I disappeared.  I don't think my setup is atypical--GSport ratchet 9t in a BSD Beverage frame. I run the guard on the outside of the dropout. My chain isn't super tight--I hate super tight chains, but it isn't flopping around. I ground out the front portion to give it more clearance around the chain.

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Re: Gsport uniguard
« Reply #7 on: March 16, 2018, 06:02:02 AM »
The hub you run can make a difference, Joytech clones typically have the chainline 13mm inward from the inside of the dropout, Ratchet  is 11.5mm. The Antigram is probably the same given it's pretty much a 17mm version of the Ratchet

I still run a Ratchet and I run my chain loose as fuck so I might have to shape a Uniguard by the sounds of it...

Offline WoBBLE

  • Member
  • ***
  • Posts: 155
    • View Profile
Re: Gsport uniguard
« Reply #8 on: March 20, 2018, 03:22:31 AM »
I run a small strip of duct tape on the inside of the guard for chain-muting purposes. My chain couldn't be any looser and this has worked fine for me!
Taking the children was a bad move...

Offline JohnW

  • Veteran
  • *****
  • Posts: 5765
    • View Profile
Re: Gsport uniguard
« Reply #9 on: June 03, 2018, 08:40:43 PM »
Mine seems great so far. Ran it on non-drive on one bike that has a Hazard V3 with female axle (so no other guard fits) and on the drive side of my Sunday Cyclone. On the Cyclone on my S&M Randy Brown (I'm guessing dropout slots have a slight angle?) it barely rubs the chain. Can hear it when pedaling but it doesn't bind or anything. Been meaning to grind it down a hair but I don't run 4 pegs often so I haven't gotten around to it.

I also drilled the hole for the anti spin pin 1mm larger and removed it in favor of screwing the Odyssey J-Peg Light anti spin pin through the guard into the peg. Now neither of them can spin.
My LAF
Quote from: super_chief;3602916
I put my nuts on that axle before it shipped, FYI

Bikeguide.org - Bike maintenance for BMX'ers

Re: Gsport uniguard
« Reply #9 on: June 03, 2018, 08:40:43 PM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special
Hello