Multimedia

Author Topic: shadow pc pedal spindle interchangability  (Read 2450 times)

0 Members and 1 Guest are viewing this topic.

Offline blueee

  • Dumbest, Ugliest, Rattiest spot searching master on bikeguide
  • O.G. Member
  • ******
  • Posts: 18496
    • View Profile
    • http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=141705194
shadow pc pedal spindle interchangability
« on: November 18, 2016, 06:12:20 PM »
so i have a lhd set of 175mm wombolts. but both arms im using are left arms. so i want to put shadow pc pedals on these cranks but i need two left pedal spindles. does anyone know what pedals have similar or the same pedal spindle i could swap out?

any chance anyone have a spare lhd non-driveside wombolt arm?

EDIT:
i tried an animal pc spindle but it was like 1/4in shorter so the final bolt only threaded on about halfway
and that spindle looked heavier
when i finally get a proper spindle on the crank, im thinking blue loctite until i can find someone with a welder at hand who can put on a single dot of weld that i could later grind/hammer off, sound idea?
« Last Edit: November 18, 2016, 07:42:39 PM by blueee »

Offline JFax

  • Sr. Member
  • ****
  • Posts: 2366
    • View Profile
Re: shadow pc pedal spindle interchangability
« Reply #1 on: November 21, 2016, 11:27:35 AM »
Friend of mine rode his profile cranks backwards for years. He just kept a wrench and tightened them hard, didnt even need loctite in the end. Think it should be ok with strong loctite, welding seems a bit extreme.
Quote from: andreasTHN;1991264
He is so good that he probably doesnt have a serial number on his frame, just a cheat code...

Bikeguide.org - Bike maintenance for BMX'ers

Re: shadow pc pedal spindle interchangability
« Reply #1 on: November 21, 2016, 11:27:35 AM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special