Multimedia

Author Topic: Loose BB shell  (Read 7606 times)

0 Members and 1 Guest are viewing this topic.

Offline Jasssu

  • Newbie
  • *
  • Posts: 10
    • View Profile
Loose BB shell
« on: April 10, 2016, 03:06:23 AM »
I have been riding my Verde Oxbridge for about a year or so. I was changing my cranks the other day and noticed that the mid bb bearings can be pulled out by hand. I think that the bb shell might be deformed. Could I fix this problem by glueing the bearings back in or is it time to get a new frame?

Offline Narcoleptic Insomniac

  • Veteran
  • *****
  • Posts: 8598
    • View Profile
Re: Loose BB shell
« Reply #1 on: April 10, 2016, 08:58:42 AM »
Depends how easy it is to pull out the bearings. If it takes some force they're probably fine but if they're floating in the shell and easily move up and down then you may have a problem. If the cranks spin freely without any play then I wouldn't worry about it.

Offline Stoked

  • dood.sweet
  • Sr. Member
  • ****
  • Posts: 1802
    • View Profile
Re: Loose BB shell
« Reply #2 on: April 10, 2016, 09:29:17 AM »
You lost me at glue back in
Quote from: i am hollywood;3458649
The Ezra 'Q' freecoaster should be out in time to put on your 2012 christmas list

Offline montymitch

  • Sr. Member
  • ****
  • Posts: 1029
    • View Profile
Re: Loose BB shell
« Reply #3 on: April 10, 2016, 06:47:00 PM »
I have been riding my Verde Oxbridge for about a year or so. I was changing my cranks the other day and noticed that the mid bb bearings can be pulled out by hand. I think that the bb shell might be deformed. Could I fix this problem by glueing the bearings back in or is it time to get a new frame?
The bearings in my frame are quite loose--I can push them out by hand. Haven't had any issues and they don't wobble or make weird noises. If they aren't super tight it's not a big deal unless they are moving in there. If they are actually loose enough to move, they'll start to wear and ovalize the shell.

Offline dude...

  • Sr. Member
  • ****
  • Posts: 2264
    • View Profile
Re: Loose BB shell
« Reply #4 on: April 10, 2016, 07:55:36 PM »
could crack some araldite or plumbers tape in there with them i guess. not really a fix though. chances are if the bb is already started deforming, it will get worse over time. depends how bad it is atm and whether its an issue for you or not. deffos something to be aware of though, if it starts to develop significant play, i would think about getting a new frame
this year i am going to have sex and it will be awesome

Offline jonathan

  • Veteran
  • *****
  • Posts: 7896
    • View Profile
Re: Loose BB shell
« Reply #5 on: April 11, 2016, 04:17:17 PM »
Loctite 609 is your best bet.

Offline got bike?

  • Member
  • ***
  • Posts: 176
    • View Profile
Re: Loose BB shell
« Reply #6 on: May 21, 2016, 06:45:20 PM »
Or you can make some aluminium cups like the american bb and use a spanish bb bearings.

Offline ediotism

  • Member
  • ***
  • Posts: 154
    • View Profile
Re: Loose BB shell
« Reply #7 on: May 22, 2016, 06:23:53 PM »
get a can of coke, then put it down the toilet to clean the bowl (much better than drinking that syrupy poison). clean the can and cut it open, use a stripe of aluminium cut from the can as a shim, whilst you start looking at your next frame.

a well shimmed BB could still last you a while.

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
Re: Loose BB shell
« Reply #8 on: May 23, 2016, 04:00:36 AM »
take everything out, spray the bb with water/leave the bike outside for a few nights. add salt if you need to. let it rust a little, and then see how easy it is to put the bearings in...

what could go wrong?

Offline ediotism

  • Member
  • ***
  • Posts: 154
    • View Profile
Re: Loose BB shell
« Reply #9 on: May 26, 2016, 08:57:06 AM »
take everything out, spray the bb with water/leave the bike outside for a few nights. add salt if you need to. let it rust a little, and then see how easy it is to put the bearings in...

what could go wrong?

not water. use vinegar. bonus points if its greasy vinegar from your chips.

Bikeguide.org - Bike maintenance for BMX'ers

Re: Loose BB shell
« Reply #9 on: May 26, 2016, 08:57:06 AM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special
Hello