Multimedia

Author Topic: clutch flange diameters?  (Read 6077 times)

0 Members and 1 Guest are viewing this topic.

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
clutch flange diameters?
« on: November 20, 2015, 12:06:55 PM »
I've got a chance to get to a shop today to get some spokes/a rim, but I don't know what rims they have, and I don't have the hub with me, so I figure I should just need the width/diameter?

thanks

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
Re: clutch flange diameters?
« Reply #1 on: November 20, 2015, 12:33:27 PM »

Offline metalbmxer

  • Sr. Member
  • ****
  • Posts: 1723
    • View Profile
Re: clutch flange diameters?
« Reply #2 on: November 20, 2015, 01:15:40 PM »
odsy has them listed on their site in the spec sheet for the hub

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
Re: clutch flange diameters?
« Reply #3 on: November 20, 2015, 01:49:02 PM »
got it, thanks
http://www.odysseybmx.com/catalog/clutch-freecoaster-hub-tech-sheet.pdf
Quote
DRIVE SIDE EFFECTIVE FLANGE DIAMETER: 56mm

NON-DRIVE SIDE EFFECTIVE FLANGE DIAMETER: 49mm

Offline badlight

  • Sr. Member
  • ****
  • Posts: 3909
    • View Profile
    • http://
Re: clutch flange diameters?
« Reply #4 on: November 20, 2015, 03:15:40 PM »
182 3x for just about any non aero rim. 2 extra turns on the drive side. Most of the time. Your mileage may vary and all that shit.

Offline metalbmxer

  • Sr. Member
  • ****
  • Posts: 1723
    • View Profile
Re: clutch flange diameters?
« Reply #5 on: November 20, 2015, 04:45:14 PM »
182 3x for just about any non aero rim. 2 extra turns on the drive side. Most of the time. Your mileage may vary and all that shit.

2 extra turns on the drive side?
wow had no idea I was supposed to do this. I just try to keep the tension even. Running mine at 4x btw

Offline badlight

  • Sr. Member
  • ****
  • Posts: 3909
    • View Profile
    • http://
Re: clutch flange diameters?
« Reply #6 on: November 21, 2015, 10:08:41 AM »
182 3x for just about any non aero rim. 2 extra turns on the drive side. Most of the time. Your mileage may vary and all that shit.

2 extra turns on the drive side?
wow had no idea I was supposed to do this. I just try to keep the tension even. Running mine at 4x btw

Different sized flanges. How is your wheel dished?

Offline metalbmxer

  • Sr. Member
  • ****
  • Posts: 1723
    • View Profile
Re: clutch flange diameters?
« Reply #7 on: November 21, 2015, 10:33:53 AM »
182 3x for just about any non aero rim. 2 extra turns on the drive side. Most of the time. Your mileage may vary and all that shit.

2 extra turns on the drive side?
wow had no idea I was supposed to do this. I just try to keep the tension even. Running mine at 4x btw

Different sized flanges. How is your wheel dished?

Not sure since I don't have a truing stand
I may have to mess with it over the holidays

Edit: but just remembered I should be running by empire next week so I'll have them check it out!

Bikeguide.org - Bike maintenance for BMX'ers

Re: clutch flange diameters?
« Reply #7 on: November 21, 2015, 10:33:53 AM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special