Multimedia

Author Topic: anything wrong with running a sprocket like this?  (Read 6135 times)

0 Members and 1 Guest are viewing this topic.

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
anything wrong with running a sprocket like this?
« on: November 16, 2015, 03:30:35 AM »
I've never paid any attention to or used spline drive sprockets, but I assume having a spacer between the arm/sprocket shouldn't cause any problems?



it'll be a little different when I'm done, but I'm pretty sure I need to space it like this to keep the driveline straight.   anyone else done it?

Offline dude...

  • Sr. Member
  • ****
  • Posts: 2264
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #1 on: November 16, 2015, 04:32:11 AM »
shouldnt matter with spline drive, no
this year i am going to have sex and it will be awesome

Offline metalbmxer

  • Sr. Member
  • ****
  • Posts: 1723
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #2 on: November 16, 2015, 09:52:07 AM »
Just make sure your chain line is good and that your cranks are evenly on the spindle and you are good! My buddy runs his like that btw

Offline milhous

  • Sr. Member
  • ****
  • Posts: 4172
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #3 on: November 16, 2015, 02:11:58 PM »
Most of my spline drive set-ups have a spacer between the arm and sprocket. Get the chainline dialed, then space the arm out enough to clear the chainstays.

Offline alaskun

  • Member
  • ***
  • Posts: 253
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #4 on: November 16, 2015, 04:52:39 PM »
then space the arms out enough to clear the chainstays.
that's been my issue, getting it even on both sides. but I got some spacers yesterday and it should be good now 

Offline montymitch

  • Sr. Member
  • ****
  • Posts: 1029
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #5 on: November 16, 2015, 08:11:19 PM »
I like that it keeps the crank sprocket boss away from the sprocket. I've seen a few kids running spline drive sprockets with the boss just rubbing there.

Offline weedbix

  • Veteran
  • *****
  • Posts: 5323
    • View Profile
Re: anything wrong with running a sprocket like this?
« Reply #6 on: November 17, 2015, 12:33:03 AM »
I was doing this with my Powerbites (+ headless bolt) recently, you'll be fine

Offline G

  • G-Sport
  • O.G. Member
  • ******
  • Posts: 10362
    • View Profile
    • http://www.gsportbmx.co.uk
Re: anything wrong with running a sprocket like this?
« Reply #7 on: November 23, 2015, 09:11:20 AM »
Tiny bit more torsional stress on the axle but not a huge worry, be better to run the crank closer in if you can, but you gotta do what you gotta do to let the cranks clear the chainstays...

:)
G.
G-Sport. Making the worlds finest BMX parts since 1994.

Please DON\'T try to PM me. Please Email me instead... email is g at gsport.co.uk

Bikeguide.org - Bike maintenance for BMX'ers

Re: anything wrong with running a sprocket like this?
« Reply #7 on: November 23, 2015, 09:11:20 AM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special
Hello