Multimedia

Author Topic: keychain installation  (Read 10330 times)

0 Members and 1 Guest are viewing this topic.

Offline medusa.cascade

  • Member
  • ***
  • Posts: 261
    • View Profile
keychain installation
« on: January 17, 2015, 10:17:45 AM »
So I finally got a hollow keychain. But the chain breaker adaptor doesn't fit my chain breaker. Of course I dont want to mess up a quite expensive chain. What have others done to over come this? 

Offline LukeTom

  • Member
  • ***
  • Posts: 164
    • View Profile
Re: keychain installation
« Reply #1 on: January 17, 2015, 10:28:25 AM »
Yeah, you can do it without a proper chain breaker, all you need is a vice. George put up 2 videos on his YouTube channel about it

https://www.youtube.com/watch?v=ohcbhDwkt0s
https://www.youtube.com/watch?v=5CjDNgCXLm0

Offline RighteousBMX

  • Member
  • ***
  • Posts: 112
    • View Profile
Re: keychain installation
« Reply #2 on: January 17, 2015, 10:46:52 AM »
I hammered mine out using a 990 brake spring cap, the supplied hollow pin adapter and a shitty plastic 5lb. dumbbell.

Danno

  • Guest
Re: keychain installation
« Reply #3 on: January 17, 2015, 11:10:07 AM »
If you're back in the Leamington area I've got the proper Odyssey chain tool in stock at the shop. I had the same problem and bodged a really old chain tool we had.

Offline medusa.cascade

  • Member
  • ***
  • Posts: 261
    • View Profile
Re: keychain installation
« Reply #4 on: January 17, 2015, 12:06:57 PM »
I have it sorted now. How tight are you guys doing it up?

Offline tecnic1

  • Member
  • ***
  • Posts: 196
    • View Profile
Re: keychain installation
« Reply #5 on: January 17, 2015, 01:54:45 PM »
I have it sorted now. How tight are you guys doing it up?
when it was new, I would go as snug as possible, then back it off a quarter turn.  I also checked it really quick before I rode.  It would stick a bit if I didn't back it off.

Now that its warn in a bit, I he-man that shit.  Smooth as buttah.

Offline badlight

  • Sr. Member
  • ****
  • Posts: 3909
    • View Profile
    • http://
Re: keychain installation
« Reply #6 on: January 17, 2015, 02:31:47 PM »
One of my 'master' pins wont take anything more than the very tip of my 3mm allen key. The rest are fine, the hex on that one is just slightly under sized I guess.

Offline medusa.cascade

  • Member
  • ***
  • Posts: 261
    • View Profile
Re: keychain installation
« Reply #7 on: January 17, 2015, 06:39:17 PM »
I've just done it up as tight I am come comfortable with. One of mine it the same as badlight. The 3 mil nearly goes in.

Offline dude...

  • Sr. Member
  • ****
  • Posts: 2264
    • View Profile
Re: keychain installation
« Reply #8 on: January 17, 2015, 08:13:22 PM »
sounds like a ballache
this year i am going to have sex and it will be awesome

Offline dude...

  • Sr. Member
  • ****
  • Posts: 2264
    • View Profile
Re: keychain installation
« Reply #9 on: January 17, 2015, 08:15:37 PM »
what do you do with the solid keychain if it doesnt come with the adaptor?
this year i am going to have sex and it will be awesome

Offline DontcallmeKenneth

  • Sr. Member
  • ****
  • Posts: 3354
    • View Profile
Re: keychain installation
« Reply #10 on: January 17, 2015, 09:30:34 PM »
I have the solid version hope its not a pain.

Offline 14thStbikes

  • Member
  • ***
  • Posts: 170
    • View Profile
Re: keychain installation
« Reply #11 on: January 17, 2015, 10:01:47 PM »
Just installed a hollow version and got a good park session in on it. Everything went smooth from the get go. It was an easy install w/ a Park CT-3 chain breaker.
I tightened the master link as much as it could go with a regular 3mm Allen key. All links moved smooth w/ no need to back off any. Still good after the

Offline medusa.cascade

  • Member
  • ***
  • Posts: 261
    • View Profile
Re: keychain installation
« Reply #12 on: January 18, 2015, 06:41:09 AM »
Other than having a shit chain breaker it has been really easy. With the solid version you don't need the adaptor.

Offline metalbmxer

  • Sr. Member
  • ****
  • Posts: 1723
    • View Profile
Re: keychain installation
« Reply #13 on: January 18, 2015, 09:54:16 AM »
U can use the cult chain breaker just have to drill out the receiver so the oversized pins can fit (and come out)

Offline montymitch

  • Sr. Member
  • ****
  • Posts: 1029
    • View Profile
Re: keychain installation
« Reply #14 on: January 18, 2015, 01:17:26 PM »
I have a hollow one that I have yet to install. I'm planning on gearing 25-9, but I may want to run 28-9. Is it going to suck to add links in the future?

Bikeguide.org - Bike maintenance for BMX'ers

Re: keychain installation
« Reply #14 on: January 18, 2015, 01:17:26 PM »

 

-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special