Author Topic: Post Your Guns (Read 781621 times)

master · « **Reply #2280 on:** April 25, 2011, 01:24:40 PM »

Quote from: Birdmane;3424761

Yeah I pretty much stole it price wise. Selling it to make my money back plus purchase a vz58 and m76 kit.

PM'ed.

EDIT: For anyone wondering, that rifle is a Poly-Tech milled receiver AK and is one of the nicest AK's you'll ever see. :thup:

Birdmane · « **Reply #2281 on:** April 27, 2011, 11:02:24 PM »

I got a new Chicago Typewriter.

That CRC hydragraphics is sick....but wayyy too expensive.

Also whats the deal with piston ARs?

DI clearly works fine and there aren't any problems, unless youre running a 14 inch barreled gun, which needs a stamp. Then you get an advantage.

If its not broke don't fix it? The proprietary uppers that have pistons are cool but I don't like the piston kits and shit like that. Save the pistons for the AKs and the m4s. DI is good in my book.

master · « **Reply #2282 on:** April 28, 2011, 12:52:36 AM »

Quote from: Birdmane;3426103

I got a new Chicago Typewriter.

That CRC hydragraphics is sick....but wayyy too expensive.

Also whats the deal with piston ARs?

DI clearly works fine and there aren't any problems, unless youre running a 14 inch barreled gun, which needs a stamp. Then you get an advantage.

If its not broke don't fix it? The proprietary uppers that have pistons are cool but I don't like the piston kits and shit like that. Save the pistons for the AKs and the m4s. DI is good in my book.

M4's aren't even piston... Just a plain old colt AR upper on it.

Birdmane · « **Reply #2283 on:** April 28, 2011, 09:48:19 AM »

Yeah not the real army/FA ones, but the whole idea with the pistons is that they work on shorter barrels, but not better on rifle length 16"+ systems.

Im a big fan of FALs, M14s and AKs. 5.56 just doesnt do it for me. Thats the bias haha.

Although id love to have x51 cost near 5.56! I cant get away from combloc stuff.

wheelr · « **Reply #2284 on:** April 28, 2011, 10:31:42 AM »

Quote from: Birdmane;3426232

Although id love to have x51 cost near 5.56!

One of the main reasons I bought an AR. Ammo costs me around $.40/rnd vs $.53/rnd for 7.62.

As for the AK, does anyone mill their own receivers? Are there any drawings floating around so an individual could machine one? (I don't know shit about AKs)

Garrett. · « **Reply #2285 on:** April 28, 2011, 10:39:12 AM »

7.62 ammo is much cheaper then that.
Try 18 cents per round and Brown Bear is decent and non-corrosive.
http://shop.militaryshooters.com/catalog/product.asp?ret_id=140211&pid=1028168
http://www.aimsurplus.com/catalog.aspx?groupid=39&name=7.62x39

wheelr · « **Reply #2286 on:** April 28, 2011, 11:36:39 AM »

7.62 x 51 (7.62 NATO). See quote:

Quote from: Birdmane;3426232

Although id love to have x51 cost near 5.56!

My $.53/rnd price is what I paid for a bunch a few years ago and still have. I only buy quality ammo with nice brass and boxed primers.

Garrett. · « **Reply #2287 on:** April 28, 2011, 12:00:00 PM »

Putting brass through an AR might be great, but anything other then Czechoslovakian brass(You can get 500 rds for $130 but it's corrosive) or steel is a waste in an AK.
I thought you were talking x39, my b.

wheelr · « **Reply #2288 on:** April 28, 2011, 12:06:49 PM »

I hear ya on that. If I had an AK it would be less about accuracy and more about reliability, including shooting whatever ammo I could find.

As of now I save my brass for future reloading or reselling. That's the main reason I buy nice stuff.

couch · « **Reply #2289 on:** April 28, 2011, 01:28:03 PM »

Quote from: wheelr;3426241

As for the AK, does anyone mill their own receivers? Are there any drawings floating around so an individual could machine one? (I don't know shit about AKs)

There are files here for quite a few firearms, one being an AK. It is for a bent receiver though I believe. I haven't opened that one up yet. I haven't been able to find any files/prints for a milled receiver. As far as I am aware though, the style of AK plays a big part in this so there are at least a few different types of receiver.
http://www.cncguns.com/downloads.html
http://firearmfiles.com/andromeda.php?q=f&f=%2Ffiles%2FAK47

You can always go the 80% flat route as well, unless you are set on milling.
Link has a few links within to 80% suppliers.
http://www.cncguns.com/forum/index.php?topic=1794.0

wheelr · « **Reply #2290 on:** April 28, 2011, 01:49:06 PM »

Thanks for the info bruh. I am in fact interested in checking out the drawings for a milled receiver as opposed to the flats. Trying to get a feel for the complexity of the piece. For now Im just trying to gather projects for when things slow down and I can hopefully get a free machine to learn on and make some shit here at work.

couch · « **Reply #2291 on:** April 28, 2011, 02:09:37 PM »

I found a milled 80% AR lower near by that I am in the process of picking up. Now that my 1911 is finished I want to build something else.

Check out the forum on cncguns.com There is a lot of information. Also garagegunsmithing.com is a great site with loads of info and projects.

Garrett. · « **Reply #2292 on:** April 28, 2011, 02:18:46 PM »

My CC Permit just arrived in the mail, so I'll be picking up this beauty after work in 9mm.

couch · « **Reply #2293 on:** April 28, 2011, 02:57:02 PM »

Looks like a very busy version of my G27

Garrett. · « **Reply #2294 on:** April 28, 2011, 03:28:07 PM »

Im just not a fan of glocks, they're nice for sure but just not for me. The PPS is also slimmer in thickness then the G27.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #2294 on:** April 28, 2011, 03:28:07 PM »

Author Topic: Post Your Guns (Read 781621 times)

Bikeguide.org - Bike maintenance for BMX'ers