Multimedia

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Boomhauer

Pages: [1] 2 3 4 5 6 ... 22
1
The Bike Shop / Re: Oldest part on your BMX?
« on: August 17, 2022, 01:26:30 AM »
It's still my O.G. RNC fullguard.. honorable mentions to my Primo Powerbites, V1 Primo Mix and my Ave drive side hub guard.

2
Sell and Swap / Re: GSport Sunday Stranger Mega Sale
« on: June 20, 2022, 10:36:48 AM »
Hey everyone. I don’t know if this board is active at all, but I wanted the good men of BG to have first dibs. I just have too much crap and need to downsize. Offer up!
BSD Beverage frame
S&M made Stranger frame
Sunday forks black
S&M Fubars 4 pc
Stranger bars 4 pc
Odyssey Sandbars 2 pc
S&M stem
Black G-Sport Ratchet 48 to chrome  Ribcage (ti axle)
Black marmoset to 36 chrome Rollcage
Green Antigram front and rear laced to black Birdcage hoops
175 Thunderbolts
T1 sprocket 28t
Fang sprocket 28t
Aitken nightwolf railed seat
Fit Benny stem
Odyssey stem. It’s like the Broc stem but not as tall.
Eclat cranks
Other shit.

Hey do you still have the 48h Ratchet wheel? If so, how much do you want for it and how much for the wheel set?

3
Sell and Swap / Re: GSport Sunday Stranger Mega Sale
« on: June 20, 2022, 10:31:32 AM »
Price on the Ratchet wheel? I might even be interested in the wheelset..

4
The Lounge / Re: Bikeguide coming back on
« on: September 15, 2021, 01:18:29 PM »
Y'all doing big bunnyhops?

5
The Lounge / Re: 15 Years on the forum
« on: October 26, 2020, 12:48:10 AM »
lol that the 15 years on this forum reminiscing thread is 3 years old. does anyone else on here actually still ride bmx besides bluemeate?
I'm still going, occasionally ride with Carlos too.. I also just picked up a Macneil Deuce Deuce complete that has sat in fantastic condition for at least a decade that I'm pretty stoked on.

6
The Lounge / Re: Where is everyone at in life?
« on: October 26, 2020, 12:40:12 AM »
Currently laid off because I messed up my shoulder doing drywall and have been working on sorting out my dental issues and general health as well as working on my truck and getting more bikes (I have 3 completes)..

Not too bad since most of my stuff burned up in the "Camp Fire" in Paradise, Ca a year or so ago.

7
Sell and Swap / Re: Big WTB: odyssey Elementary stem
« on: August 17, 2020, 02:21:21 PM »
Additionally, I am looking for gyro tabs for mine.

8
The Bike Shop / Re: RNC Manufacturing returns to bmx!
« on: March 12, 2020, 03:13:10 PM »
Whoa  great news, although the new old stock I had acquired probably isnt worth so much anymore but who cares. I love titanium and I love RNC.
SO stoked right now. cranks looks amazing

He's doing all new designs on most stuff so unless it's bolts, seat clamps and bar ends it should hold its worth.

9
The Bike Shop / Re: RNC Manufacturing returns to bmx!
« on: March 12, 2020, 03:11:46 PM »
It's funny because when I saw the RNC light sprocket on Empire, I thought it was NOS that they had found but then I saw more stuff popping up from them and realized they're back in BMX

Look at the new cranks on RNCMFG.com

They're insane, cnc machined Ti arms, heat treated, with Ti spindle, and all Ti bolts.. I've talked to Ryan a fair bit about new stuff and there is alot more to come..

I might finally retire my original RNC Ti fullguard.. To a second bike :)

Those cranks look nuts! Wonder how much flex you would feel on them?

They'd be alot stiffer than Powerbites, solid cnc'd Ti is stronger and stiffer than aluminum, these aren't just some welded tube so they should be amazing.. We'll see no matter what because as soon as I can afford them I'm going to get them.

10
The Bike Shop / Re: RNC Manufacturing returns to bmx!
« on: March 11, 2020, 04:12:27 AM »
It's funny because when I saw the RNC light sprocket on Empire, I thought it was NOS that they had found but then I saw more stuff popping up from them and realized they're back in BMX

Look at the new cranks on www.RNCBMX.com

They're insane, cnc machined Ti arms, heat treated, with Ti spindle, and all Ti bolts.. I've talked to Ryan a fair bit about new stuff and there is alot more to come..

I might finally retire my original RNC Ti fullguard.. To a second bike ;)

11
The Bike Shop / Re: RNC Manufacturing returns to bmx!
« on: March 11, 2020, 04:10:12 AM »
It's funny because when I saw the RNC light sprocket on Empire, I thought it was NOS that they had found but then I saw more stuff popping up from them and realized they're back in BMX

Look at the new cranks on RNCMFG.com

They're insane, cnc machined Ti arms, heat treated, with Ti spindle, and all Ti bolts.. I've talked to Ryan a fair bit about new stuff and there is alot more to come..

I might finally retire my original RNC Ti fullguard.. To a second bike :)

12
The Bike Shop / RNC Manufacturing returns to bmx!
« on: March 09, 2020, 09:14:14 AM »
Ryan Frisk has decided to make kick ass bike parts once again.. I immediately messaged him and asked about Titanium fullguard sprockets (I own one of the original 12) and he confirmed that he will be doing some, possibly lightned up and heat treated.

https://rncbmx.com/

13
Sell and Swap / Re: Lots of rad stuff cheap
« on: March 08, 2019, 09:59:24 AM »
How much for the Khe freecoaster?

14
The Bike Shop / Re: 36vs48h,,, here, have an anecdote
« on: December 05, 2018, 09:18:09 PM »
CarlosMeate, my suggestion would be to replace the spokes since double butted spokes will stretch sooner..

You could find where the hops in the rim are by taking the tube/tire off and spinning it slowly then determine whether the rim has flat spots or is just out of true.

15
The Bike Shop / Re: 36vs48h,,, here, have an anecdote
« on: December 05, 2018, 09:12:25 PM »
Sell me the 48 blue.

The flange broke off several months ago.

Pages: [1] 2 3 4 5 6 ... 22
-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special