Bikeguide.org - Bike maintenance for BMX'ers
The Back Alley => Sell and Swap => Topic started by: benjamin1 on July 27, 2017, 12:16:10 PM
-
The Good: It can take a beating. I do lots of grinds like ice picks and 180s into grinds and it holds up really good. I would go buy this hub if i was you. and it is pretty cheap.
The Bad: it comes with pretty long axle nuts which if you run pegs, you cant get alot of threads from the nut so only like half of the nut is in contact with the axle. so that will result in the axle nuts coming loose. And the nuts are pretty weak so they strip pretty easily.