Bikeguide.org - Bike maintenance for BMX'ers
The Street => The Bike Shop => Topic started by: blueee on November 18, 2016, 06:12:20 PM
-
so i have a lhd set of 175mm wombolts. but both arms im using are left arms. so i want to put shadow pc pedals on these cranks but i need two left pedal spindles. does anyone know what pedals have similar or the same pedal spindle i could swap out?
any chance anyone have a spare lhd non-driveside wombolt arm?
EDIT:
i tried an animal pc spindle but it was like 1/4in shorter so the final bolt only threaded on about halfway
and that spindle looked heavier
when i finally get a proper spindle on the crank, im thinking blue loctite until i can find someone with a welder at hand who can put on a single dot of weld that i could later grind/hammer off, sound idea?
-
Friend of mine rode his profile cranks backwards for years. He just kept a wrench and tightened them hard, didnt even need loctite in the end. Think it should be ok with strong loctite, welding seems a bit extreme.