Multimedia

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sblmnlbmx

Pages: [1]
1
Sell and Swap / Re: LF: Animal stem and Alcantara Frame
« on: July 21, 2016, 07:50:33 AM »
Anyone?

2
Sell and Swap / LF: Animal stem and Alcantara Frame
« on: July 17, 2016, 09:47:27 PM »
Im looking for:

Animal, Jumpoff stem (black)

Terrible One, Ruben Alcantara frame (1st gen, the one with standard cup headset)

Thanks



3
The Bike Shop / Re: Brake Issues, Please Help
« on: January 20, 2016, 11:30:23 PM »
Im running a gyro. I dont know the brand of the gyro cables. I just went to the bike shop and got them. Ive done that before and never had this issue. Before the gyro I also runned a straight Odyssey Linear K shield cable and I had the same problem. Thats why I discarded the cable as being the cause of my problem.

Right now there are no kinks in my cables. I will lub them and let you guys know.

What I have noticed so far is that my rim seems to collect a lot of dust everytime I go ride. As lobg as my rim is clean and dry, my brake works perfect, but it only takes line 30 minutes and then it starts collecting dust and it slips. Then I have to clean my rim and sand my pads again.

I also wanna thank every one of you guys for trying to help me out on this.

4
The Bike Shop / Re: Brake Issues, Please Help
« on: January 19, 2016, 08:17:33 PM »
No play amd no flex. Supers smooth because of the sealed bearings. Pads touch make even contact with the rim surface at the same time. I really dont know what is wrong.

5
The Bike Shop / Re: Brake Issues, Please Help
« on: January 19, 2016, 04:36:26 PM »
Thanks for answering. My current setup is the following:

Black GSport ribcage Rim
Bicycle Union brake with sealed bearings
Odyssey monolever
Snafu mobeus gyro
Odyssey Slim by four clear pads.

My brake is adjusted perfectly. It worked pretty good with the original pads and a chrome hazzard lite Rim. But got sick of riding chrome in my rear wheel and the pads worn off.

I also cleaned the coke and blazed the pads. The result keeps being the same. It squeaks and works for no longer than 30 mins and then it begins to slip.

6
The Bike Shop / Brake Issues, Please Help
« on: January 19, 2016, 02:34:43 PM »
I have a black gsport birdcage rim. I had a raw flt rim before (the one with holes). My brake is perfectly adjusted. So far I have tried:

Clear Odyssey slim by four pads
Black Aztek pads
Natural (red) kool stop pads
Clear Fly pads

My brakes slip way too much. Guys from Odyssey said that all I needed was to clean my rim with soapy water. Ive tried that and it didnt work. I also tried with coke and same got the same results. They squeak and work for no more than 30 mins. After that they slip. I hate that. Got any tips?

7
Nobody??

8
Sell and Swap / Re: Garage Clean Out
« on: July 30, 2015, 09:07:27 PM »
Do you still have the dirt monsters?..

9
Sell and Swap / Re: Looking for FBM, profile, solid, standard parts
« on: June 29, 2015, 04:46:52 PM »
Chromoly spindle or titanium spindle? Gdh or regular?.. and how much?

10
Sell and Swap / Re: Looking for FBM, profile, solid, standard parts
« on: June 29, 2015, 08:52:21 AM »
Yes I do, What you got?

11
Sell and Swap / Re: Looking for profile, solid, standard parts
« on: June 28, 2015, 09:44:11 PM »
How much you want for them?

12
I looking for 36h only, but let me see if I can make them work on something, How much you want for them and what colors do you have?

13
Please do. I have everything else. Thanks

14
Ok Im looking for:

*   3 American Bottom brackets.

*   36h Chrome Hazzard lite Rims (3 if possible).

*   Fit Alluminum railed seatpost (2 if possible).

*   Fit brown ECCD railed seat

*   PRIMO Gorilla Red Cup (with sealed bearing if possible )

*   Chris King Headset 1-1/8.

*   Odyssey 99er Seat (Blue if possible).

*   S&M 3/8 Pitchfork (Not tapered).

*   72 titanium spokes

*   FBM protect ya neck stem (black, blue, or silver). With gyro plate.

*   Last generation Standard byke Fork.

*   Last generation 175mm RHD/LHD compatible Solid crankset for 22mm spindle (black if possible).

*   Oldschool Profile SS hubs, 36h, rear shell if possible.

*   Profile GDH titanium rear axle.

*   Profile GDH titanium spindle.

*   Last generation Profile cranks, 175mm and RHD/LHD (black or raw if possible).

*   1st generation Fly brake (silver if possible).

*   Eastern silver barends or gripstops.

*   Profile dog collar barends - silver.

*   S&M old threadless 1-1/8 Redneck stem.





alexnunezmiranda@hotmail.com

Thanks

Pages: [1]
-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special