Bikeguide.org - Bike maintenance for BMX'ers
Others => Multimedia => Bike Gallery => Topic started by: andtitlefight on January 08, 2015, 04:40:43 PM
-
picked up the new taller steertube widemouth pitchforks and installed a racing challenger last week then found two cracks around my seat clamp and one up the seat tube of my sfa. this t1 lasted me nearly three years, far from dead yet. still content.
terrible one sfa 2012 20.75 s&m made
s&m widemouth tall pitchforks
terrible one elfs
brown ed grips
animal aluminum bar ends
s&m new old stock racing engraved challenger stem
stack of mutiny carbon spacers/rand headset
animal nigel seat
fbm post
fit 170mm indent cranks
merritt mighty sprocket 25t
empire spanish bb
fit mac pedals pins removed from one side left/lead foot
shadow chain
four long fit pegs
three steel s&m cymbal hubguards
division steel drive side hubguard
2.10/2.35 animal mtt tires
animal front wheel
cinema rear cass 9t rhd
(http://p.vitalbmx.com/photos/forums/2015/01/08/38239/s1200_t1.jpg)
(http://p.vitalbmx.com/photos/forums/2015/01/08/38240/s1200_t2.jpg)
(http://p.vitalbmx.com/photos/forums/2015/01/08/38241/s1200_t3.jpg)
(http://p.vitalbmx.com/photos/forums/2015/01/08/38242/s1200_crack.jpg)
-
yuss
-
damn integrated seatclamps. get it welded now before it gets worse and you should get another 3 years out of it
-
Check to see if it is just the PC cracking from the clamp area flexing.
-
Check to see if it is just the PC cracking from the clamp area flexing.
i did when i discovered it, sadly theres a crack in the tubing also. Hard to see in the shit picture i posted haha nonetheless it lasted a long time
-
I'd cut it flush and use a wedge post
-
Damn that's a bummer. Still looking amazing though!
-
Black t1 with black rims. Does it get any better?
-
so so sick.
quick question:
do the s&m guards line up flush with the fit pegs?
do you think a larger diameter peg (linOG) would create a lip?
thanks!
-
dang yo
-
so so sick.
quick question:
do the s&m guards line up flush with the fit pegs?
do you think a larger diameter peg (linOG) would create a lip?
thanks!
They line up perfect with fit pegs, linos would take away from a decent portion of the guard but could still be used.
-
That little rail you've got looks super fun.
-
That little rail you've got looks super fun.
it is. Theres a mall being torn down nearby so we took one home and buried it haha
-
That's awesome. I'm trying to find something like that near me so I can put it in my sideyard.