Multimedia

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Bunky

Pages: [1]
1
Bike Gallery / My Partymaster Street Jumper
« on: December 15, 2023, 12:16:34 AM »
I know this is blasphemous, but I'm posting it here anyway.

The Rise Partymaster frame
Works components 1.5 degree steepener headset
Pike fork with the brake tabs cut off and left side lower bolt switched for steel one
Solid stem
NS District bars
Profile 15mm front and Z-coaster rear hubs
Profile SS cranks, Eclat AK guard sprocket, Odyssey grand stand pedals
Tree seat



Also proof of riding:


2
Bike Gallery / All sorts of blasphemy
« on: May 12, 2020, 09:40:17 AM »
I got this custom 26 "bmx" done up a little while back and figured I'd share it here for nobody to look at.



Frame: Custom Dutch Bikes 26
Fork: NS Bikes RNS
Handlebars: NS Bikes District
Grips:  Fit Savage
Stem: S&M Enduro 49mm with Profile face plate
Headset: Mixed pieces with custom low top cap
Cranks: Custom Dutch 170 extra wides
Pedals: Grand Stands
Chain: Cult 510
Sprocket: Custom Dutch 22mm spline drive full guard 22 tooth
Front Hub: Profile Mini
Front Spokes:  USA Stainless Black Double Butted
Front Nipples:  G-Sport Taper Hex
Front Rim: Sun MX33
Front Tire: KHE folding
Rear hub: Profile Z-coaster with custom 14mm female axle (Profile only does 3/8ths female...)
Rear Spokes:  USA Stainless Black Double Butted
Rear Nipples:  G-Sport Taper Hex
Rear Rim: Rhyno Light
Rear Tire:  KHE folding
Seat: Dropnose for life
Seatpost: Old as steel one that I have no idea who made, but it's got the bigger guts I like
Brakes: Springfields with spoke straddle mod
Pegs:  Seeley's

If anyone wants to know the frame geo, let me know.  Also, here's a riding clip to prove that I actually ride it.  I need to film more on it, but I'm just bad at asking my friends to film.
https://www.youtube.com/watch?v=7ykYWLU65Js



3
Sell and Swap / Looking for Socket Drive cranks
« on: September 30, 2018, 10:24:22 AM »
Anybody have any socket drive cranks they want to sell?

4
Sell and Swap / WTB - Profile Driver
« on: June 26, 2018, 09:44:04 AM »
Anyone have a 9, 10, or 11 tooth profile RHD driver they want to sell?

5
Sell and Swap / Yo! Gimme a Wombolt spindle bolt!
« on: February 27, 2018, 03:09:51 PM »
Does anyone have a Wombolt spindle bolt they'd be willing to sell me?

The size is different to the Twombolt/Thunderbolt size and I can't seem to find one.  I've emailed Odyssey, but know they can take a couple of days to respond, so I figured I'd ask Moe Fuggin blue site.

6
Like the title says, I'm looking for either the Blue6 made or Profile made bolts that have a SAE 5/16 - 18 thread, but also have a 6mm allen key head.

7
So, I'm selling off several of my bikes since I don't have too much time to ride anymore and whenever I do, I just find myself riding my Liquid 24 cause it's just too damn much fun.  There's no more use of them sitting around in my workshop shed collecting dust and spider webs and I'd rather some other people have some fun on them.  Some of these bikes are hardly ridden.  Feel free to PM here, or email me at bunkytt(at)gmail with any questions or for additional pictures. 

S&M Intraket, Intraket bars, elementary stem, Hoffman 990 fork, Geisha light wheelset, Primo hollowbites with Ti spindle -- SOLD



Mutiny Animist 21.5, Rawed Odyssey race fork cs2, FBM Bottleneck, T1 8.85 bars, Fit ECCD Kevlar seat, Thompson post, Mosh seatpost clamp, SUPER beat up Eclat 22mm cranks, T1 28tooth spocket, Fit sealed pedals, Profile mini to Aliennation rim, Profile freecoaster (have the pieces to turn into cassette) laced to rhyno light, Ruben light 2.25 tires -- $650



S&M 22 holmes with 22tt, Pitchfork xlt fork, Credence Turtleneck, S&M Fathead bars, Fit ECCD Kevlar seat, fit railed post, Odyssey cranks, currently a MDS sprocket, but will probably switch it out for a 7075 simple sprocket since that seems more fitting, trail mix pedals, Profile mini front wheel to revenge rim, Eclat coaster (ezra style that can be switched to cassette) laced to revenge rim, Inova tires (not pictured)  --  SOLD



Fit CR24 complete frame and fork, Animal Jumpoff stem, Fit Mac bars, Tech 77 lever, Demolition leather railed seat, fit railed post, Solid Hella Light 22mm cranks, Animal sprocket, Fit sealed pedals (not currently pictured but will put on), Odyssey Vandero 24 complete wheel up front,  Demolition prototype coaster rear (Ezra style that can be switched to cassette) laced to dk race 24 rim, Tioga fs100 tires  --  $600



Bombtrack Dash complete bike, Switched out the fixed gear rear hub to a coaster brake which is stupidly fun, switched sprocket to a tree splined steel sprocket to match the 12tooth coaster brake rear cog, switched the stem to a Fit highrise, Odyssey fork compression bolt, Odyssey headset cap, Odyssey nightwolf seat - Will include original fixed gear hub, stem, and sprocket along with this so that it's all of the original complete parts except for the seat -- Sold - I shipped this thing over from Europe and don't know how many of them are in the USA



Custom Marino 29er big BMX frame - This thing is a fun bike and I can actually bunnyhop it about 14+ inches off the ground - Old school GT stem, currently has some Sunday 24umph bars, but I think it would be better suited with some taller old mongoose bars that I have, Shimano DX brakes, not pictured is the DX lever I have to go with it, RNS fork,  vandero front hub laced to rhyno light, geisha rear hub to rhyno light, premium splined profile knock off cranks, 22 spline drive Tree light sprocket, GT dropnose seat --  $500


8
Sell and Swap / WTB: 165 - 170mm cranks
« on: June 05, 2017, 11:42:45 PM »
Anyone have some short cranks?

Looking for something cheap just to see if I like the length.

9
Sell and Swap / Anyone have some bars they want to sell?
« on: May 26, 2016, 10:42:40 AM »
Looking for some cheap bars that are around the 8.75 height range and have 3-5 degrees of upsweep.

I don't care how they look as long as their not bent.  They can be rusty or have a million stickers on them. 

2 pieces, 4 pieces, eleventy pieces...  I don't really care too much as long as they're close to 8.75 and have some upsweep.

10
Sell and Swap / Looking for: bunch of stuff
« on: November 15, 2015, 08:35:50 AM »
Looking to find:
  • S&M Enduro 52mm stem
  • FBM Bottleneck or midget stem
  • Sunday 24umph bars (not the 24umph xl) in black or silver primarily
  • Interested in any other cruiser bars especially if they are chrome.  Would love to find some of the chrome 24umph xl replicas that came on Sunday complete Wave-C's.
  • Brown leather seat
  • OG Shadow railed non-slim seat

11
The Lounge / So, lets talk about Garage Ramps!
« on: October 20, 2015, 03:55:53 PM »
With winter quickly approaching, I've decided that as soon as I finish building my chicken coop that I'd like to build a garage ramp to mess around on so I can keep my muscles stretched out and in riding order while the weather is gross and rainy.  If I use half the garage it allows me a 23ft by 10ft space to build in, and I already have a decent amount of scrap wood to get things started.  I'm thinking about a vert wall on the non door side, a steep banked wall on the wall with the window, and a two and a half foot tall quarter on the garage door side.  See pictures below:




Here's where you guys come in.

I can't for the life of me decide what radius I should use for the transitions!

I helped my buddies Scootie and CJ build some small garage ramps several years ago that turned out awesome, but I can't remember how we came up with the radius size.  I know we measured some other ramps that they had and kind of winged it, and it came out awesome. 



Anybody have any ideas?

12
Looking for some short bars for my cruiser as I've been trying out some different ones.  Will consider anything between 7 and 8 inches tall and would prefer chrome but will consider other colors. Would love to find some chrome BSD too loose bars or some of the chrome 24umph xl bars off one of the Sunday Model C completes.

Also looking for:
- Long (50+mm) stems. Preferably top load. Would really love to find a FBM Bottleneck
- 22mm bottom bracket or even just the cones/washers off of a 22mm cranks.
- As always anything interesting or old freecoaster wise always peaks my interest.

Let me hear what you've got!

13
The Bike Shop / Bolt size/thread help - Sunday chain tensioner
« on: August 30, 2015, 10:08:49 AM »
Does anyone know what size/tpi the bolt for Sunday integrated chain tensioner are?

I want to replace my sets crew ones with a longer bolt with a head on it so that I can just turn it with my fingers.

14
Bike Gallery / Custom Indust "2-Timer"
« on: December 16, 2014, 01:09:50 PM »


Frame: 22 Indust Custom - Has the 2-Ton front end, with the Spacetime rear end.  Specs:
         HA: 75
         TT:  21, 5/8ths
         Stand Over:  9 inches
         BB Height:  12, 5/8ths
         Chainstay length:  14
Fork:  22 Pitchfork XLT
Stem:  Credence
Bars: Fathead
Grips:  ARoss
Headset:  Odyssey with custom top cap
Post:  Thompson
Seat:  GT Dropnose
Cranks:  Solid
Sprocket:  Sentinal 28 tooth
Pedals:  JC's
Chain:  pieced together combo of bluebird and Cult 510
Bottom Bracket:  Mutiny 22mm
Lever:  Odyssey Mono
Cable:  Quick Slick
Brakes:  Springfields
Front Wheel:  Profile with Revenge spokes/rim, and Taper Hex nips
Front Tire:  Mainline 2.425
Rear Wheel:  Demolition Proto Coaster (same internals as Ezra) with Revenge spokes/nipples/rim
Rear Tire:  Faction F22

15
The Bike Shop / Experiance Rawing Sunday/Odyssey Parts?
« on: October 30, 2014, 08:02:26 AM »
Does anyone have experience rawing Sunday or Odyssey parts?

I've got some Sunday 24umph bars I'm trying to raw, and I put some stripper I got from Hoe Depot on there with no results, and then tried aircraft grade spray stripper (which has normally done the trick on anything for me), with no results either.

What's the best way to take off this Black Magic stuff?  Seems that once it's on there, there's no getting it off!!!

Pages: [1]
-->

Tell them " Sheepdog sent you", for a little something special

Click this image for a little something special
Hello