The Street > The Bike Shop

welded clamp

(1/3) > >>

andtitlefight:
Has anyone ever ever cut off an integrated seat clamp and filed the excess clean to run a regular clamp? The crack next to the clamp on my frame is minimal, I'm considering trying this and riding it a bit longer. Any input would be great. I hung it up, but im considering trying. Thanks dudes.

Patty:
You have the sfa right? I'd measure it out and see where your at with mutiny or kink trim clamp. Or cut that thing off at a nice angle, file it pretty and run a wedge post

Stoked:
Maybe cut the tabs, clean it up and get a slim metal clamp welded on.  Would s&m fix it? 

andtitlefight:

--- Quote from: Patty on January 15, 2015, 10:33:14 AM ---You have the sfa right? I'd measure it out and see where your at with mutiny or kink trim clamp. Or cut that thing off at a nice angle, file it pretty and run a wedge post

--- End quote ---
yeah the sfa. The crack shows inside too but minimally, so it would probably be alright, i think a wedge would further it unfortunately.

andtitlefight:

--- Quote from: Stoked on January 15, 2015, 10:45:25 AM ---Maybe cut the tabs, clean it up and get a slim metal clamp welded on.  Would s&m fix it?

--- End quote ---
i should ask em, maybe i can clean it up and attempt that option also, or maybe just leave it on the wall haha

Navigation

[0] Message Index

[#] Next page