The Street > The Bike Shop
The "what the hell is Odyssey / Gspprt cooking up" thread.
dude...:
--- Quote from: ediotism on March 06, 2015, 02:49:32 AM ---
--- Quote from: dude... on March 05, 2015, 06:49:05 PM --- the two bolts that are there have the nuts facing down so the allen key bolt head is on the top and still usable. also, having the nuts there means you have to grind them down with the plastic, which slows down the wear on the pedal (cos steel takes ages to grind down).
--- End quote ---
that's very nice. if i recall correctly, the pedals come with 21mm and 18mm long bolts. i bought some 15mm ones so the setup is 18 and 15mm's, only on one side.
you can probably get some at 12mm or so, and when you swap to a new pedal half you can pop those in for slowing down grind wear and not have to deal with bolts that stick out the grind side. or maybe you already do that.
--- End quote ---
i had a load of old ground down bolts kicking about from when i first got these pedals and was grinding on them with all the pins in. i hacksawed the stock ones down a bit for the rest of the pedals after tearing my shins open, they last ages though. ive got a pack of spare bolts as well so these pedals should pretty much last me forever, just need to buy a pack of spare body halves like once every year or so
Navigation
[0] Message Index
[*] Previous page
Go to full version