The Street > The Bike Shop

definitive freecoaster thread

<< < (14/15) > >>

Bunky:
Wasn't the Colony prototype built by Zodiac?

Maybe I'm mistaken.

Topsey:
Waiting on the Video from Charlie about the Coastersaurus/Guards & im waiting to see the internals on the Eclat then i shall make up my mind!

Spev:
More Eclat Blind pics.

Nutbaggs:

--- Quote from: Bunky;3582088 ---Wasn't the Colony prototype built by Zodiac?

Maybe I'm mistaken.
--- End quote ---


Evan@luxbmx (spev)
http://www.colonybmx.com.au/news/2012/03/fakie-anyone/

cmc4130:
Well, I know this is an old thread . . . but there is good info in it.  In the market to buy one . . . .


Cult
http://www.empirebmx.com/cult-freecoaster-hub
36h and 9t only
RHD or LHD
designed using patented KHE technology
tapered roller bearing on drive side + high quality sealed cartridge bearing on non-drive side
one 6802 bearing in driver + one needle roller bearing
needle thrust bearing behind clutch
includes slack adjustment washers
 
two axle choices:
1-pc 14mm cromo heat-treated axle
3-pc female 14mm cromo heat-treated axle with 3/8" bolts (14mm axle extends past locknuts 4mm to fit 14mm dropout slots)


Eclat Blind
http://www.empirebmx.com/eclat-blind-freecoaster-hub
36h
9t driver
6061 T-6 AL shell
4130 cromo heat-treated female axle (3/8" x 24t bolts, 14mm female axle passes into dropout) or 14mm male axle
2 high quality japanese bearings
polymer bushing in driver
hub drive direction can be switched from RHD to LHD
allen key inner axle for easy maintenance
590 g (20.8 oz)

Primo Freemix
http://www.empirebmx.com/primo-freemix-freecoaster-hub
6061-T6 aluminum hub shell
14mm male axle or 14mm female axle with 3/8" bolts
1-pc 9t driver and ACB bearings for side support
 
hub shell bearings: 6002 (x1) non-drive side, 7905 ACB (x1) drive side
available in either RHD or LHD
available with 9t driver
driver bearings: 7802-14 (x2)
23 oz (w/9t driver)


Shadow Conspiracy Raptor
http://www.empirebmx.com/shadow-conspiracy-raptor-freecoaster-hub
6061-T6 aluminum hub shell
14mm heat-treated axle w/allen insert for easy removal
1-pc 9t driver and ACB bearings for side support
 
hub shell bearings: 6002 (x1) non-drive side, 7905 ACB (x1) drive side
available in either RHD or LHD
includes three slack adjustment washers to adjust engagement slack
available with 9t driver
driver bearings: 6802-14 (x1) and one needle bearing
23.2 oz

Navigation

[0] Message Index

[#] Next page

[*] Previous page