The Street > The Bike Shop
Quick Questions
Brendan O.:
My profile crank arm sits kinda loose on the spindle. Left to right is tight, it just rocks back and forth in the circular direction a bit, like the splines on the spindle wore out. Is this the so-much-talked-about Profile Wobble? What's a generic fix?
Gary:
--- Quote from: Brendan O.;3608262 ---Is this the so-much-talked-about Profile Wobble? What's a generic fix?
--- End quote ---
Yeap, that's exactly what it describes. I fixed my 41 Thermals using 271 Loctite. the 242 didn't seem too hold.
http://www.loctiteproducts.com/p/10/15/t_lkr_red/overview/Loctite-Threadlocker-Red-271.htm
My V2 Fly cranks seemed like they were beyond Loctite I used JB Weld on the spindle crank interface. That was more of a permanent fix. Just holding me over until I get new cranks
Brendan O.:
Allright thanks. I was afraid this day would come. I see there is one 1mm ring inbetween the crankarm and the conical spacer so I'll try removing that first and see if it helps. The spindle is titanium so I wouldn't like messing around with that too much. Is it usually the splines on the crankarm or the splines on the spindle that wear out?
Trent:
I need a metal guard for a wtp supreme front hub. What fits?
KillSeth:
Steve-O bike check on Ride today:
Why run so many tall headset spacers and then flip your stem?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version