The Street > The Bike Shop
Quick Questions
Sasha:
Lucky Strike. I put a 44t on mine for laffs.
attactrl:
--- Quote from: mutinous;3564021 ---The creaking of powerbites is solved by greasing the spindle? My shadow cranks sound like shit and I'm 95% sure the spindle is greased. Either that or it is the noise of my ruben pedals that are bent to shit.
--- End quote ---
My Hollows would creak, Antiseized the shit out of them, no more noise.
Topsey:
Does anyone know when the Antigram is going to be out? Its top of my list also, i want to know when i can get it. Ive got to get some new parts before hand so hopefully it will be out around the end of summer.
Meursault:
--- Quote from: JohnW;3556197 ---I'm sure he could. It's 17mm at the ends and 14mm in the center. 14mm thick aluminum is just not enough for pegs. The early Fly axles tapered to 15mm in the middle from 17 and they broke a lot. You've got 2 good options there. Chromoly axle the size of the stock one with 17mm outer and 14 or 15mm inner, or 17mm aluminum all the way through. I'd suggest 3/8x24 either way. With 17mm 7075 all the way through you'd have the axle strength of the Vandero 2.
--- End quote ---
What no. The madera hub uses 17mm ID hub shell bearings, and 15mm ID driver bearings.
JohnW:
--- Quote from: Meursault;3565261 ---What no. The madera hub uses 17mm ID hub shell bearings, and 15mm ID driver bearings.
--- End quote ---
Right, it'd been a while since I've had a rear one apart. I was thinking about the front hub when I made that post.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version