The Street > The Lounge
What have you made?
Moshrides1:
--- Quote from: BOUNCEHOUSE420;3573073 ---theyre not all theyre cracked up to be you still have to use the grinder to clean up after. i use my band saw and jig saw way more than my plasma cutter cause i hate having the compressor running too. it does come in handy for some things though.
--- End quote ---
With proper settings and having the torch at the right height, there should be little slag on the back side of the cut. I use my plasma cutter for everything that involves cutting now.
BOUNCEHOUSE420:
if you plan on mig or tig welding the material it still needs to be cleaned up with the grinder. it has its place i just feel like the bandsaw is more convenient for most of the shit ive been doing lately.
Moshrides1:
--- Quote from: BOUNCEHOUSE420;3573135 ---if you plan on mig or tig welding the material it still needs to be cleaned up with the grinder. it has its place i just feel like the bandsaw is more convenient for most of the shit ive been doing lately.
--- End quote ---
Yeah that's true. That's why my next purchase is going to be a cnc :D
drewfunk:
Seat pan progress. Rolled the edges around the frame rails and am using cut up grips between the pan and frame. Havent settled on a way to mount it yet though.
Alex.:
Cutting sheet metal with a jig saw is such a pain and is hard to get a nice straight cut for me. I've gotten pretty good at using a 4 1/2" grinder.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version