The Street > The Lounge
Post Your Guns
couch:
Those Lego videos are done really well!
brickarms.com
I'm nerding out on Legos right now!
king_palm:
--- Quote from: couch;3309542 ---I'm going to look into the legalities and limitations of "build parties". If there are no hoops to jump thru i'd be down to set one up for the guys in the area to finish up a bunch of 80% lowers at my house.
--- End quote ---
ask on calguns.
sokoloka:
--- Quote from: couch;3309541 ---TM sells lowers less the FCG pocket and a couple holes. There are jigs you can use to finish these on a drill press or mill or you can lay them out by hand/DRO and do them without the jigs. There is a bunch of information on cncguns.com
I like the Tactical Machining stuff a lot but if I'm going with an 80% I'm going to track down a yellow logic. Lowers are simple enough though, I could bang one out of barstock at work or home if it really came down to it.
--- End quote ---
This definitely sounds like something that I'd be interested in.
Looking at this:
http://www.tacticalmachining.com/products.php?pid=28#images/490_345-80-lower.jpg
All I'd need to do would follow the mapped out finishing steps and pick up an upper kit? $80 sound deece for the receiver above?
couch:
--- Quote from: sokoloka;3309678 ---This definitely sounds like something that I'd be interested in.
Looking at this:
http://www.tacticalmachining.com/products.php?pid=28#images/490_345-80-lower.jpg
All I'd need to do would follow the mapped out finishing steps and pick up an upper kit? $80 sound deece for the receiver above?
--- End quote ---
Here is most of the basics. Most 80% will be pretty much the same work as this.
http://www.cncguns.com/projects/ar15lower80tutorial-2.html
BOUNCEHOUSE420:
The final milling needs to be done by or under the close supervision of the owner
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version